Manara - Qatar Research Repository
Browse
1/1
2 files

Cost-effective microwave-assisted O3- type sodium-based layered oxide cathode materials for sodium-ion batteries

journal contribution
submitted on 2024-01-22, 05:16 and posted on 2024-01-22, 09:45 authored by R.A. Harindi Gayara, Buzaina Moossa, R.A. Shakoor, Rana Faisal Shahzad, Muhammad Sajjad, Nirpendra Singh, Shahid Rasul, Talal Mohammed Al tahtamouni

In this work, phase pure and highly crystalline O3-type layered oxide material (Na1Ni0.33Mn0.33Fe0.33O2-NNMF) was developed using; (i) a conventional solid-state synthesis route and (ii) a facile microwave-assisted sol–gel technique. A comparison of structural, thermal, and electrochemical properties is presented to elucidate the usefulness of the microwave-assisted sol–gel synthesis technique. A remarkable reduction in the sintering process time is noticed in the microwave-assisted sol–gel synthesis technique without compromising on the structural, thermal and electrochemical properties when compared to the conventional solid-state synthesis route confirming its decent cost-effectiveness. It is further noticed that NNMF developed through microwave-assisted sol–gel synthesis technique demonstrates superior thermal stability and comparable electrochemical performance as compared to the same material produced through the conventional sintering process. The decent electrochemical properties induced in NNMF during the microwave-assisted sol–gel synthesis technique can be attributed to the efficient diffusion of Na + ions into/from the host structure during the intercalation/de-intercalation process as indicated by the high value of sodium diffusion coefficient (1 × 109-3.58 × 109 m2 s− 1). The Potentiostatic Intermittent Titration Technique (PITT) analysis confirms single-phase Na + intercalation/deintercalation in the host structure, regardless of the synthesis process. Finally, EIS analysis confirms the capacity fading of the developed materials during the cycling process is essentially due to an increase in the resistance with the increasing number of cycles due to the gradual thickening of formed SEI layer. The microwave-assisted sol–gel synthesis technique can be effectively employed for the production of many families of cathode materials at competitive cost facilitating their commercialization.

Other Information

Published in: Energy Reports
License: http://creativecommons.org/licenses/by/4.0/
See article on publisher's website: https://dx.doi.org/10.1016/j.egyr.2023.07.038

Funding

Open Access funding provided by the Qatar National Library.

History

Language

  • English

Publisher

Elsevier

Publication Year

  • 2023

License statement

This Item is licensed under the Creative Commons Attribution 4.0 International License.

Institution affiliated with

  • Qatar University
  • Center for Advanced Materials - QU
  • College of Engineering - QU
  • College of Arts and Sciences - QU

Usage metrics

    Qatar University

    Licence

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC